SABnzbd Forums

Hi

I'm using SabNZBd 0.6.x together with SickBeard and Couchpotatoe on my Popcorn Hour A300 and I'm loving it However, when I use Newzbin in `index sites`, I get these error/messages:

2012-04-07 12:55:46,761 ERROR: Newzbin server changed its protocol

I guess because Newzbin changed its domainname from "newzbin.com" to "newzbin2.es" I get my errormessage.

Does anybody out here know how I can fix this error? Thanks very much

Get the most recent SABnzbd: 0.6.15

sander wrote:Get the most recent SABnzbd: 0.6.15

where can I find this one for my Popcorn Hour A300?

bassie21 wrote:

sander wrote:Get the most recent SABnzbd: 0.6.15

where can I find this one for my Popcorn Hour A300?

Hopefully in the place where you got your current, older version. Here on http://sabnzbd.org/download/ there are only pre-packed SAB versions for Windows and OSX, and the python source version (which I run on my Linux).

sander wrote:

bassie21 wrote:

sander wrote:Get the most recent SABnzbd: 0.6.15

where can I find this one for my Popcorn Hour A300?

Hopefully in the place where you got your current, older version.

Installed this version with NMT Community Software Installer. It says: "Latest version, new daemon.sh and using better yenc for faster downloads. Also now using opkg instead of ipkg." I have v0.6.9 by the way.

bassie21 wrote: Installed this version with NMT Community Software Installer. It says: "Latest version, new daemon.sh and using better yenc for faster downloads. Also now using opkg instead of ipkg." I have v0.6.9 by the way.

If you can find the NMT SABnzbd package maintainer, ask him for 0.6.15

sander wrote:

bassie21 wrote: Installed this version with NMT Community Software Installer. It says: "Latest version, new daemon.sh and using better yenc for faster downloads. Also now using opkg instead of ipkg." I have v0.6.9 by the way.

If you can find the NMT SABnzbd package maintainer, ask him for 0.6.15

Ok thanks! I found the guy who maintains this package over here. I'll ask him!

bassie21 wrote:

sander wrote:

bassie21 wrote: Installed this version with NMT Community Software Installer. It says: "Latest version, new daemon.sh and using better yenc for faster downloads. Also now using opkg instead of ipkg." I have v0.6.9 by the way.

If you can find the NMT SABnzbd package maintainer, ask him for 0.6.15

Ok thanks! I found the guy who maintains this package over here. I'll ask him!

UPDATE: I downloaded 0.6.15 from here, updated my PCH A300 with it, and everything is fine now. Thanks!!

bassie21 wrote:

UPDATE: I downloaded 0.6.15 from here, updated my PCH A300 with it, and everything is fine now. Thanks!!

So you can run the plain python source version on NMT? Cool!

Is it completely functional, including auto-start-up as a daemon?

sander wrote:

bassie21 wrote:

UPDATE: I downloaded 0.6.15 from here, updated my PCH A300 with it, and everything is fine now. Thanks!!

So you can run the plain python source version on NMT? Cool!

Is it completely functional, including auto-start-up as a daemon?

it has been running @2,5MB/sec for over an hour now. Seems to work just fine!

bassie21 wrote:

sander wrote:

bassie21 wrote:

UPDATE: I downloaded 0.6.15 from here, updated my PCH A300 with it, and everything is fine now. Thanks!!

So you can run the plain python source version on NMT? Cool!

Is it completely functional, including auto-start-up as a daemon?

it has been running @2,5MB/sec for over an hour now. Seems to work just fine!

OK, good, but let us know whether runs OK after a reboot. Especially: does it boot the new version, or the old version.

And if the boots the new version, could you write a mini-howto for a recent version of SAB on NMT? I think you first have to install the package (that will take care of unrar, python, par, etc), and that you then can upgrade...

sander wrote:
OK, good, but let us know whether runs OK after a reboot. Especially: does it boot the new version, or the old version.

And if the boots the new version, could you write a mini-howto for a recent version of SAB on NMT? I think you first have to install the package (that will take care of unrar, python, par, etc), and that you then can upgrade...

I've done several reboots and yes ... i can conform that the new version is loaded



this is how I did it:

1. installed the 0.6.9 version from NMT Community Software Installer
2. after installing, it says that this build is the latest, however, there's a 0.6.15 version available (which is not (?) customized for your PCH A300) over
3. HERE
4. unrar the above file [3]
5. make a copy of your existing sabnzbd.ini
6. copy unrarred file [3] over \\YOUR_NMT\share\Apps\SABnzbd
7. copy existing sabnzbd.ini back
8. reboot using NMT Community Software Installer
9. access Sab from http://192.168.0.xxx:8080

thats's it!!

Thank you. I've changed the title of your post to reflect its contents.

I've a HDX1000 at home, so that's a NMT also, although quite old. I wonder if SAB could run on that machine ... it has a 300 Mhz MIPS processor ...

BTW:

You could try SAB 0.7.0 Beta 2; it has some new feature, see http://wiki.sabnzbd.org/introducing-0-7-0

sander wrote:Thank you. I've changed the title of your post to reflect its contents.

I've a HDX1000 at home, so that's a NMT also, although quite old. I wonder if SAB could run on that machine ... it has a 300 Mhz MIPS processor ...

Well...I know that when downloading or unrarring, it's impossible to use my A300 (which has a 800 MHz processor) for watching a movie. So I download at night (using the Sab schedule option). Works for me, you might want to try it with your HDX1000