Page 1 of 2
rss still not working in 0.4b2
Posted: April 8th, 2008, 9:41 pm
by steve51184
i've had a LOT of problems with the rss in 0.3x and still can't get it to work but the new rss system in 0.40b2 is better as i can add the rss url but i can't add anything to the filter as if i do i get the below error:
Code: Select all
500 Internal error
The server encountered an unexpected condition which prevented it from fulfilling the request.
Powered by CherryPy 2.2.1
Re: rss still not working in 0.4b2
Posted: April 8th, 2008, 10:03 pm
by steve51184
forgot to add here are my rss settings:
Code: Select all
[[tvnzb.com]]
uri = http://www.tvnzb.com/tvnzb_new.rss
cat = ""
pp = ""
script = ""
enable = 0
filter0 = "", 3, "", A, *
Re: rss still not working in 0.4b2
Posted: April 9th, 2008, 5:22 am
by switch
Break it again (by getting the 500 error), close down SABnzbd and send your sabnzbd.log and cherrypy.log over to us at
bugs@sabnzbd.org
Re: rss still not working in 0.4b2
Posted: April 9th, 2008, 3:09 pm
by steve51184
done/sent
Re: rss still not working in 0.4b2
Posted: April 9th, 2008, 4:03 pm
by shypike
Sorry, I need your full sabnzbd.ini file too.
Just remove any account data.
cache/rss_data.sab would be useful too.
So far I have found nothing that breaks my Linux or Windows boxes.
You are sure that the *.tmpl files in the interfaces/Default folder belong to SABnzbd-0.4.0Beta2 ?
Re: rss still not working in 0.4b2
Posted: April 9th, 2008, 6:26 pm
by steve51184
shypike wrote:
Sorry, I need your full sabnzbd.ini file too.
Just remove any account data.
cache/rss_data.sab would be useful too.
So far I have found nothing that breaks my Linux or Windows boxes.
You are sure that the *.tmpl files in the interfaces/Default folder belong to SABnzbd-0.4.0Beta2 ?
i'll delete my install and install a fresh SABnzbd-0.4.0Beta2 then try again and if i get the same error i'll resend the logs along with the 2 other files you asked for
Re: rss still not working in 0.4b2
Posted: April 9th, 2008, 6:45 pm
by steve51184
still got the same error so i email the 4 files you asked for
Re: rss still not working in 0.4b2
Posted: April 10th, 2008, 9:12 am
by shypike
On my systems I have not been able to reproduce the problem,
not even with your files.
Which version of Cheetah are you using?
Is it 2.0.1 or an older release?
Re: rss still not working in 0.4b2
Posted: April 10th, 2008, 10:08 am
by ferno
shypike wrote:
On my systems I have not been able to reproduce the problem,
not even with your files.
Which version of Cheetah are you using?
Is it 2.0.1 or an older release?
Hi,
Since I have almost the same problem as steve51184 I checked my cheetah and I run version 1.0.
Can this be the problem? Shoudl I upgrade?
One other question which OS are you runnin on steve51184?
I am running on Mandriva 2008 x86_64
Re: rss still not working in 0.4b2
Posted: April 10th, 2008, 10:38 am
by ferno
Yep!!
It is working now.
Just installed Cheetah 2.01 and all problems disappeared.
I bet steve51184 is running a older cheetah also.
Thanx Shypike!!
Re: rss still not working in 0.4b2
Posted: April 10th, 2008, 11:33 am
by shypike
Good that it's working now.
I'm surprised you got SABnzbd working at all with 1.0.
Cheetah 2.0rc7 or higher should work fine.
I should include a check on the Cheetah version as well.
Re: rss still not working in 0.4b2
Posted: April 10th, 2008, 2:05 pm
by ferno
shypike wrote:
I should include a check on the Cheetah version as well.
I think that is good idea, to implement checks for the minimal required versions of the installed software.
Re: rss still not working in 0.4b2
Posted: April 10th, 2008, 2:32 pm
by steve51184
Re: rss still not working in 0.4b2
Posted: April 11th, 2008, 12:11 am
by steve51184
well well i've got the rss to let me add the feed and add filters but it's not downloading anything from the rss feed
can some one confirm this is a working feed:
http://www.tvnzb.com/tvnzb_new.rss
also does anyone have a good site for rss?
Re: rss still not working in 0.4b2
Posted: April 11th, 2008, 1:35 am
by shypike
That is what I use to test.
What do you get when you click Query?
Are there any warnings or errors visible in the Connection screen afterwards?
