SABnzbd Forums

Posted: **June 22nd, 2023, 6:51 am**

Hey everyone,

i already tried a few things. I just want to confirm beforehand that the debian user exists (only user) and that the permissions are set.
I'm on Debian 11, headless.

I tried it with a service:

Code: Select all

$ cat /etc/systemd/system/sabnzbdplus.service.BAK
#/usr/lib/systemd/system/sabnzbdplus.service
[Unit]
Description=Sabnzbd
Wants=network-online.target
After=network-online.target

[Service]
User=debian
Group=debian
#ExecStart=sabnzbdplus --config-file /home/debian/.sabnzbd/sabnzbd.ini --logging 1 --daemon
#ExecStart=/usr/bin/sabnzbdplus --daemon
#ExecStart=/usr/bin/python3 /usr/bin/sabnzbdplus --config-file /home/debian/.sabnzbd/sabnzbd.ini --logging 1 --daemon
ExecStart=/usr/bin/python3 /usr/bin/sabnzbdplus --config-file /home/debian/.sabnzbd/sabnzbd.ini --logging 1 --daemon
Type=forking

Restart=on-failure

[Install]
WantedBy=multi-user.target

I tried it with a Cronjob in the debian crontable:

Code: Select all

@reboot /usr/bin/python3 /usr/bin/sabnzbdplus --config-file /home/debian/.sabnzbd/sabnzbd.ini --logging 1 --daemon

That also doesnt work

How do I get sabnzbd to autostart in debian?
The init.d config still needs me to start it by hand and the "enable" keyword doesn't work. Only start or stop.

Posted: **June 23rd, 2023, 1:38 am**

The package ships an init.d, which will also work with systemd's compatibility mode as long as you do not add a native systemd service with the same name. That init.d script is enabled by default, but will only actually start the application after you edit /etc/default/sabnzbdplus to set the user, and afterwards tell systemd to reload the service files from disk (sudo systemctl daemon-reload).

If you insist on adding a systemd service, I suggest starting with the example at https://github.com/sabnzbd/sabnzbd/blob ... 40.service and replacing the "/opt/sabnzbd/SABnzbd.py" part in ExecStart with "/usr/bin/sabnzbdplus".

Posted: **June 23rd, 2023, 8:10 am**

jcfp wrote: ↑June 23rd, 2023, 1:38 am The package ships an init.d, which will also work with systemd's compatibility mode as long as you do not add a native systemd service with the same name. That init.d script is enabled by default, but will only actually start the application after you edit /etc/default/sabnzbdplus to set the user, and afterwards tell systemd to reload the service files from disk (sudo systemctl daemon-reload).

If you insist on adding a systemd service, I suggest starting with the example at https://github.com/sabnzbd/sabnzbd/blob ... 40.service and replacing the "/opt/sabnzbd/SABnzbd.py" part in ExecStart with "/usr/bin/sabnzbdplus".

Okay so I removed my systemd entity via the rm command now. I purged sabnzbd after backing up my sabnzbd.ini. I then did a

Code: Select all

sudo systemctl daemon-reload

and reinstalled sabnzbd from the debian packages.

I configured the default:

Code: Select all

$ cat /etc/default/sabnzbdplus
# This file is sourced by /etc/init.d/sabnzbdplus
#
# When SABnzbd+ is started using the init script, the
# --daemon option is always used, and the program is
# started under the account of $USER, as set below.
#
# Each setting is marked either "required" or "optional";
# leaving any required setting unconfigured will cause
# the service to not start.

# [required] user or uid of account to run the program as:
USER=debian

# [optional] full path to the configuration file of your choice;
#            otherwise, the default location (in $USER's home
#            directory) is used:
CONFIG=/home/debian/.sabnzbd/sabnzbd.ini

# [optional] hostname/ip and port number to listen on:
HOST=debianserver
PORT=8080

# [optional] extra command line options, if any:
EXTRAOPTS=

I executed

Code: Select all

sudo systemctl daemon-reload

again and went on with

Code: Select all

$ sudo service sabnzbdplus start

The status tells me that the default isn't enabled

Code: Select all

$ sudo service sabnzbdplus status
● sabnzbdplus.service - LSB: SABnzbd+ binary newsgrabber
     Loaded: loaded (/etc/init.d/sabnzbdplus; generated)
     Active: active (exited) since Fri 2023-06-23 14:57:40 CEST; 9min ago
       Docs: man:systemd-sysv-generator(8)
      Tasks: 0 (limit: 9407)
     Memory: 0B
        CPU: 0
     CGroup: /system.slice/sabnzbdplus.service

Jun 23 14:57:40 debianserver systemd[1]: Starting LSB: SABnzbd+ binary newsgrabber...
Jun 23 14:57:40 debianserver sabnzbdplus[1725]: SABnzbd+ binary newsgrabber: service not enabled, edit /etc/default/sabnzbdplus.
Jun 23 14:57:40 debianserver systemd[1]: Started LSB: SABnzbd+ binary newsgrabber.

But enabeling doesnt work:

Code: Select all

$ sudo service sabnzbdplus enable
Usage: /etc/init.d/sabnzbdplus {start|stop|restart|force-reload|status}

Do you see my mistake? I genuenly don't

Posted: **June 23rd, 2023, 3:26 pm**

Do you see my mistake? I genuenly don't

Not yet

What result do you get for this command:

Code: Select all

/bin/sh -c 'unset USER && . /etc/default/sabnzbdplus && [ -z "${USER%:*}" ] && echo "not enabled (USER=$USER)" || echo "enabled (USER=$USER)"'

Posted: **June 23rd, 2023, 3:54 pm**

jcfp wrote: ↑June 23rd, 2023, 3:26 pmWhat result do you get for this command:
Code: Select all
/bin/sh -c 'unset USER && . /etc/default/sabnzbdplus && [ -z "${USER%:*}" ] && echo "not enabled (USER=$USER)" || echo "enabled (USER=$USER)"'

Code: Select all

$ /bin/sh -c 'unset USER && . /etc/default/sabnzbdplus && [ -z "${USER%:*}" ] && echo "not enabled (USER=$USER)" || echo "enabled (USER=$USER)"'

enabled (USER=debian)

And for a good measure:

Code: Select all

$ whoami
debian

Posted: **June 24th, 2023, 1:34 am**

So it's all setup correctly, and the exact same check the init.d script does also passes. Maybe systemd is using a cached version of the default file, in spite of the daemon-reload? Does the issue persist after a reboot?

Posted: **June 24th, 2023, 6:30 am**

jcfp wrote: ↑June 24th, 2023, 1:34 am So it's all setup correctly, and the exact same check the init.d script does also passes. Maybe systemd is using a cached version of the default file, in spite of the daemon-reload? Does the issue persist after a reboot?

Yes I rebooted a bunch of times at this point.

Was there maybe something wrong with how I removed the systemd entity?

I basically just removed it from /etc/systemd/system via

Code: Select all

sudo rm

Edit: I figured it out, that was indeed my issue.

I did this and everything is running now:

Code: Select all

sudo systemctl disable sabnzbdplus
sabnzbdplus.service is not a native service, redirecting to systemd-sysv-install.
Executing: /lib/systemd/systemd-sysv-install disable sabnzbdplus

there was still something in the /lib/systemd folder.

Thank you so much for your help! We Finally got there

Posted: **July 31st, 2023, 7:05 am**

jcfp wrote: ↑June 24th, 2023, 1:34 am So it's all setup correctly, and the exact same check the init.d script does also passes. Maybe systemd is using a cached version of the default file, in spite of the daemon-reload? Does the issue persist after a reboot?

Hey, sorry to grab this thread out. I was afk for a few weeks.

So after we fixed the weird systemd issue I am now indeed using the init.d file.

However I can't connect via browser but everything is (apperantly) running and set up correctly.

Code: Select all

$ sudo service sabnzbdplus status
● sabnzbdplus.service - LSB: SABnzbd+ binary newsgrabber
     Loaded: loaded (/etc/init.d/sabnzbdplus; generated)
     Active: active (running) since Mon 2023-07-31 13:53:18 CEST; 2min 5s ago
       Docs: man:systemd-sysv-generator(8)
    Process: 840 ExecStart=/etc/init.d/sabnzbdplus start (code=exited, status=0/SUCCESS)
      Tasks: 23 (limit: 9407)
     Memory: 70.4M
        CPU: 3.503s
     CGroup: /system.slice/sabnzbdplus.service
             └─987 /usr/bin/python3 -OO /usr/bin/sabnzbdplus --daemon --pidfile /var/run/sabnzbdplus/pid --config-file /home/debian/.sabnzbd/sabnzbd.ini

Jul 31 13:53:15 debianserver systemd[1]: Starting LSB: SABnzbd+ binary newsgrabber...
Jul 31 13:53:18 debianserver sabnzbdplus[840]: Starting SABnzbd+ binary newsgrabber:.
Jul 31 13:53:18 debianserver systemd[1]: Started LSB: SABnzbd+ binary newsgrabber.

Configs:

Code: Select all

$ cat /etc/default/sabnzbdplus
# This file is sourced by /etc/init.d/sabnzbdplus
#
# When SABnzbd+ is started using the init script, the
# --daemon option is always used, and the program is
# started under the account of $USER, as set below.
#
# Each setting is marked either "required" or "optional";
# leaving any required setting unconfigured will cause
# the service to not start.

# [required] user or uid of account to run the program as:
USER=debian

# [optional] full path to the configuration file of your choice;
#            otherwise, the default location (in $USER's home
#            directory) is used:
CONFIG=/home/debian/.sabnzbd/sabnzbd.ini

# [optional] hostname/ip and port number to listen on:
HOST=debianserver
PORT=8080

# [optional] extra command line options, if any:
EXTRAOPTS=

Code: Select all

$ cat /home/debian/.sabnzbd/sabnzbd.ini
__version__ = 19
__encoding__ = utf-8
[misc]
pre_script = None
REST IS REDACTED BUT CONTENTS INCLUDE USERNAME/PW AND SO ON

So everything is apperantly up, running and correctly configured. But when I want to connect via the browser I just get the standard message of the browser when it can't connect to a website/service.

However as soon as I do this

Code: Select all

$ sudo service sabnzbdplus restart

It runs normally and I can connect to it via the browser??

Posted: **June 8th, 2024, 1:59 pm**

This thread was a huge help!! Just went through the upgrade process and had systemd enabled vs init.d.

After removing the /lib/systemd/system/sabnzbdplus* (I had two files) everything started as it should.

Thanks all!

SABnzbd Forums

Can't get autostart in debian 11 to work

Can't get autostart in debian 11 to work

Re: Can't get autostart in debian 11 to work

Re: Can't get autostart in debian 11 to work

Re: Can't get autostart in debian 11 to work

Re: Can't get autostart in debian 11 to work

Re: Can't get autostart in debian 11 to work

Re: Can't get autostart in debian 11 to work

Re: Can't get autostart in debian 11 to work

Re: Can't get autostart in debian 11 to work