Page 1 of 1

Using RSS To Support iOS Process

Posted: December 1st, 2022, 9:42 am
by digitalvibe
Hi,

My goal is to be able to use my iPhone to locate an NZB via NZBGeek, have it downloaded within a Dropbox folder so I can then watch the resulting video file.

I had thought the easiest way of achieving the main part of this would be to generate a Cart RSS link via NZBGeek then add that to my Feed URLs within SabNZB. I can then add any nzb to my NZBGeek "cart", which is then added to the RSS feed and Sab can then download however, while this sort of works, I can't find a way to have the download trigger be instant. If I setup the RSS Checking Interval the best I can do is to have it check every 15mins. I also tried using the Scheduling option and set that to be every 3 seconds but that didn't make any difference, i.e. there was still a significant delay to the download process, i.e. way more than 3 secs.

Any ideas on how I can better tackle this? Thanks

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 10:23 am
by sander
set that to be every 3 seconds
The NZBgeek site might block you for that. There is a reason the minimum is 15 minutes.

But ... you can trigger it manually in the SAB webgui: hamburger icon in upper right corner -> Read All Feeds Now.

SAB will then read the RSS feeds within 5 or 10 seconds.

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 10:34 am
by digitalvibe
Thanks for the tip re. potential blocking from NZBGeek. Just wish there was a setup that didn’t involve so many manual steps to make this work

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 10:42 am
by digitalvibe
But ... you can trigger it manually in the SAB webgui: hamburger icon in upper right corner -> Read All Feeds Now.
Sorry, I'm sure I'm being thick but how would I access the SAB webgui from my phone? Using the same IP I use via my desktop doesn't work.

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 10:53 am
by sander
Is your phone connected to your LAN / WLAN?

(Or is your phone connected via 4G/5G?)

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 11:20 am
by digitalvibe
Connected via LAN /WLAN

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 11:59 am
by sander
Did you check SAB -> config -> general -> SABnzbd Host? It must be 0.0.0.0 to make it accessible from your LAN.

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 12:38 pm
by digitalvibe
It wasn't set to that no (was just localhost) but have updated to 0.0.0.0 and restarted SAB. Despite this, still can't access via my phone

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 12:48 pm
by sander
what URL do you use to access SABnzbd from your phone?

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 12:51 pm
by digitalvibe
I've never used my phone to access SAB before so was using the same URL as via my desktop. Is this not correct?

Re: Using RSS To Support iOS Process

Posted: December 1st, 2022, 5:30 pm
by sander
Ah. It's something like http://192.168.1.4:8080/

You can find the IP address of your PC via SAB -> Wrench (upper right) cornert -> Local IPv4 address