Page 1 of 1
Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 1:45 am
by stefwill
The container starts fine but for some reason looks like it's on port 8080 rather than the defined 9090
2021-12-13 06:09:54,176::INFO::[SABnzbd:1437] Starting web-interface on :::8080
...
2021-12-13 06:09:59,398::INFO::[ssdp:108] Serving SSDP on 10.35.0.26 as SABnzbd
Any assistance is GREATLY appreciated!
Cheers StefWill
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 2:25 am
by sander
What is your question?
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 4:36 am
by stefwill
Sorry.
I can't load the Web interface.
The logs are not any help at all.
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 7:51 am
by jcfp
stefwill wrote: ↑December 13th, 2021, 4:36 amThe logs are not any help at all.
That's impossible to tell without access to the complete log. Where is it?
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 8:06 am
by sander
stefwill wrote: ↑December 13th, 2021, 4:36 am
Sorry.
I can't load the Web interface.
The logs are not any help at all.
Still no question. But: how did you try to access SABnzbd's web interface? With which URL?
And: do you know how docker works with port mappings ... inside and outside?
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 3:50 pm
by stefwill
I tried to post my logs and docker-compose but the forum won't let me post text containing URLs but I'll try again.
When I start the container, Portainer reports it as Running (green) The logs look OK to me except that it is starting on port 8080 rather than the 9090 that I have specified.
I'm accessing it using the server's IP:9090
This is the Log from Portainer for my Sabnzbd container (Edited to obfuscate links)
Code: Select all
[s6-finish] waiting for services.
[s6-finish] sending all processes the TERM signal.
[s6-finish] sending all processes the KILL signal and exiting.
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.
[s6-init] ensuring user provided files have correct perms...exited 0.
[fix-attrs.d] applying ownership & permissions fixes...
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] 01-envfile: executing...
[cont-init.d] 01-envfile: exited 0.
[cont-init.d] 01-migrations: executing...
[migrations] started
[migrations] no migrations found
[cont-init.d] 01-migrations: exited 0.
[cont-init.d] 10-adduser: executing...
usermod: no changes
-------------------------------------
_ ()
| | ___ _ __
| | / __| | | / \
| | \__ \ | | | () |
|_| |___/ |_| \__/
Brought to you by linuxserver . io
-------------------------------------
To support the app dev(s) visit:
SABnzbd: h-t-t-p-s-:-/-/-sabnzbd_org/donate
To support LSIO projects visit:
h-t-t-p-s-:-/-/-www . linuxserver . io/donate/
-------------------------------------
GID/UID
-------------------------------------
User uid: 1001
User gid: 100
-------------------------------------
[cont-init.d] 10-adduser: exited 0.
[cont-init.d] 20-config: executing...
[cont-init.d] 20-config: exited 0.
[cont-init.d] 90-custom-folders: executing...
[cont-init.d] 90-custom-folders: exited 0.
[cont-init.d] 99-custom-scripts: executing...
[custom-init] no custom files found exiting...
[cont-init.d] 99-custom-scripts: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] done.
2021-12-13 06:09:54,125::INFO::[SABnzbd:1180] --------------------------------
2021-12-13 06:09:54,126::INFO::[SABnzbd:1181] SABnzbd . py-3.4.2
2021-12-13 06:09:54,126::INFO::[SABnzbd:1191] Commit = cc831e16d87d12fe4d7bbcc71b9ff579eb1335ff
2021-12-13 06:09:54,126::INFO::[SABnzbd:1193] Full executable path = /app/sabnzbd/SABnzbd . py
2021-12-13 06:09:54,126::INFO::[SABnzbd:1194] Arguments = "/app/sabnzbd/SABnzbd . py" "--config-file" "/config" "--server" "::"
2021-12-13 06:09:54,127::INFO::[SABnzbd:1195] Python-version = 3.8.10 (default, Sep 28 2021, 16:10:42)
[GCC 9.3.0]
2021-12-13 06:09:54,127::INFO::[SABnzbd:1196] Dockerized = True
2021-12-13 06:09:54,127::INFO::[SABnzbd:1197] CPU architecture = x86_64
2021-12-13 06:09:54,142::INFO::[SABnzbd:1200] Platform = posix - Linux-5.10.60-qnap-x86_64-with-glibc2.29
2021-12-13 06:09:54,143::INFO::[SABnzbd:1206] Preferred encoding = UTF-8
2021-12-13 06:09:54,143::INFO::[SABnzbd:1218] SSL version = OpenSSL 1.1.1f 31 Mar 2020
2021-12-13 06:09:54,144::INFO::[SABnzbd:1227] Certifi version = 2021.10.08
2021-12-13 06:09:54,144::INFO::[SABnzbd:1228] Loaded additional certificates from /usr/local/lib/python3.8/dist-packages/certifi/cacert.pem
2021-12-13 06:09:54,145::INFO::[SABnzbd:1248] Using INI file /config/sabnzbd.ini
2021-12-13 06:09:54,146::INFO::[postproc:135] Loading postproc queue
2021-12-13 06:09:54,147::INFO::[scheduler:190] Scheduling RSS interval task every 60 min (delay=26)
2021-12-13 06:09:54,147::INFO::[scheduler:201] Scheduling VersionCheck on day 5 at 14:57
2021-12-13 06:09:54,147::INFO::[scheduler:215] Setting schedule for midnight BPS reset
2021-12-13 06:09:54,148::INFO::[scheduler:218] Setting schedule for server expiration check
2021-12-13 06:09:54,148::INFO::[scheduler:223] Setting scheduler for server quota check
2021-12-13 06:09:54,155::INFO::[config:905] Writing settings to INI file /config/sabnzbd.ini
2021-12-13 06:09:54,158::INFO::[__init__:334] All processes started
2021-12-13 06:09:54,159::INFO::[SABnzbd:344] Template location for Glitter is /app/sabnzbd/interfaces/Glitter
2021-12-13 06:09:54,159::INFO::[SABnzbd:344] Template location for Config is /app/sabnzbd/interfaces/Config
2021-12-13 06:09:54,160::INFO::[misc:1098] [N/A] Running external command: ['/usr/bin/unrar']
2021-12-13 06:09:54,166::INFO::[misc:1098] [N/A] Running external command: ['/usr/bin/par2', '-h']
2021-12-13 06:09:54,173::INFO::[SABnzbd:431] SABYenc module (v4.0.2)... found!
2021-12-13 06:09:54,174::INFO::[SABnzbd:450] Cryptography module (v36.0.0)... found!
2021-12-13 06:09:54,174::INFO::[SABnzbd:455] par2 binary... found (/usr/bin/par2)
2021-12-13 06:09:54,174::INFO::[SABnzbd:462] UNRAR binary... found (/usr/bin/unrar)
2021-12-13 06:09:54,174::INFO::[SABnzbd:472] UNRAR binary version 6.00
2021-12-13 06:09:54,175::INFO::[SABnzbd:480] 7za binary... found (/usr/bin/7za)
2021-12-13 06:09:54,175::INFO::[SABnzbd:491] nice binary... found (/usr/bin/nice)
2021-12-13 06:09:54,175::INFO::[SABnzbd:495] ionice binary... found (/usr/bin/ionice)
2021-12-13 06:09:54,176::INFO::[SABnzbd:1437] Starting web-interface on :::8080
2021-12-13 06:09:54,176::INFO::[_cplogging:213] [13/Dec/2021:06:09:54] ENGINE Bus STARTING
/usr/local/lib/python3.8/dist-packages/cherrypy/process/servers . py:416: UserWarning: Unable to verify that the server is bound on 8080
warnings.warn(msg)
2021-12-13 06:09:59,298::INFO::[_cplogging:213] [13/Dec/2021:06:09:59] ENGINE Serving on h-t-t-p-://:::8080
2021-12-13 06:09:59,298::INFO::[_cplogging:213] [13/Dec/2021:06:09:59] ENGINE Bus STARTED
2021-12-13 06:09:59,298::INFO::[SABnzbd:1473] Starting SABnzbd . py-3.4.2
2021-12-13 06:09:59,299::INFO::[postproc:233] Completed Download Folder /config/Downloads/complete is not on FAT
2021-12-13 06:09:59,300::INFO::[dirscanner:117] Dirscanner starting up
2021-12-13 06:09:59,301::INFO::[panic:239] Launching browser with h-t-t-p-://127.0.0.1:8080/sabnzbd
2021-12-13 06:09:59,306::INFO::[notifier:122] Sending notification: SABnzbd - SABnzbd 3.4.2 started (type=startup, job_cat=None)
2021-12-13 06:09:59,398::INFO::[zconfig:61] No bonjour/zeroconf support installed
2021-12-13 06:09:59,398::INFO::[ssdp:108] Serving SSDP on 10.35.0.26 as SABnzbd
This is my sabnzbd.yml (Edited to obfuscate links)
Code: Select all
version: "3"
services:
sabnzbd:
cap_add:
- AUDIT_WRITE
- CHOWN
- DAC_OVERRIDE
- FOWNER
- FSETID
- KILL
- MKNOD
- NET_BIND_SERVICE
- NET_RAW
- SETFCAP
- SETGID
- SETPCAP
- SETUID
- SYS_CHROOT
cap_drop:
- AUDIT_CONTROL
- BLOCK_SUSPEND
- DAC_READ_SEARCH
- IPC_LOCK
- IPC_OWNER
- LEASE
- LINUX_IMMUTABLE
- MAC_ADMIN
- MAC_OVERRIDE
- NET_ADMIN
- NET_BROADCAST
- SYSLOG
- SYS_ADMIN
- SYS_BOOT
- SYS_MODULE
- SYS_NICE
- SYS_PACCT
- SYS_PTRACE
- SYS_RAWIO
- SYS_RESOURCE
- SYS_TIME
- SYS_TTY_CONFIG
- WAKE_ALARM
container_name: sabnzbd
entrypoint:
- /init
environment:
- HOME=/config
- LANG=en_US.UTF-8
- LANGUAGE=en_US.UTF-8
- PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
- PGID=100
- PUID=1001
- PYTHONIOENCODING=utf-8
- TERM=xterm
hostname: d0d84019f3e1
image: docker . io/linuxserver/sabnzbd:latest
ipc: private
labels:
build_version: 'Linuxserver . io version:- 3.4.2-ls46 Build-date:- 2021-11-12T11:09:36+01:00'
com.qnap.qcs.gpu: False
com.qnap.qcs.network.mode: nat
maintainer: thelamer
org.opencontainers.image.authors: linuxserver . io
org.opencontainers.image.created: 2021-11-12T11:09:36+01:00
org.opencontainers.image.description: "[Sabnzbd](h-t-t-p-:-/-/-sabnzbd . org/) makes\
\ Usenet as simple and streamlined as possible by automating everything we\
\ can. All you have to do is add an .nzb. SABnzbd takes over from there, where\
\ it will be automatically downloaded, verified, repaired, extracted and filed\
\ away with zero human interaction."
org.opencontainers.image.documentation: h-t-t-p-s-:-/-/-docs . linuxserver . io/images/docker-sabnzbd
org.opencontainers.image.licenses: GPL-3.0-only
org.opencontainers.image . ref . name: 225dd4efe81661b7ffa8757776ca5f247097eaac
org.opencontainers.image.revision: 225dd4efe81661b7ffa8757776ca5f247097eaac
org.opencontainers.image.source: h-t-t-p-s-:-/-/-github . com/linuxserver/docker-sabnzbd
org.opencontainers.image.title: Sabnzbd
org.opencontainers.image.url: h-t-t-p-s-:-/-/-github . com/linuxserver/docker-sabnzbd/packages
org.opencontainers.image.vendor: linuxserver . io
org.opencontainers.image.version: 3.4.2-ls46
logging:
driver: json-file
options:
max-file: 10
max-size: 10m
mac_address: XX:XX:XX:XX:XX:XX
ports:
- 9090:9090/tcp
restart: always
stdin_open: true
tty: true
ulimits:
- Hard: 65535
Name: nofile
Soft: 65535
volumes:
- /share/appdata/sabnzbd:/config
- /share/usenet:/usenet
- /share/usenet/incomplete:/usenet/incomplete
networks: {}
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 4:05 pm
by sander
Your sabnzbd.yml says
ports:
- 9090:9090/tcp
Your sab container is listening on port 8080. And that port is not exposed to the host ...only 9090 is ...
So ... no match.
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 4:16 pm
by stefwill
@sander
But why is it listening on port 8080 when I'm defining port 9090?
The web interface for my NAS runs on 8080
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 4:24 pm
by sander
stefwill wrote: ↑December 13th, 2021, 4:16 pm
@sander
But why is it listening on port 8080 when I'm defining port 9090?
The web interface for my NAS runs on 8080
Does the lsio docker listen/obey to that yaml file at all?
If so, what if you define 9090:8080 ? So 9090 on the host, connected to 8080 inside the docker container.
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 4:28 pm
by stefwill
Thanks I'll try 9090:8080
How would I check if the lsio docker listen/obey to that yaml file?
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 13th, 2021, 4:30 pm
by sander
stefwill wrote: ↑December 13th, 2021, 4:28 pm
How would I check if the lsio docker listen/obey to that yaml file?
Read the documentation of portainer and LSIO ... ?
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 14th, 2021, 2:54 am
by jcfp
stefwill wrote: ↑December 13th, 2021, 4:28 pmHow would I check if the lsio docker listen/obey to that yaml file?
If it did, you would expect the port number to be passed to sabnzbd as a command line argument. But in the not-so-useless log, the --server option only specifies a host ("::") without a port number:
stefwill wrote: ↑December 13th, 2021, 3:50 pm2021-12-13 06:09:54,126::INFO::[SABnzbd:1194] Arguments = "/app/sabnzbd/SABnzbd . py" "--config-file" "/config" "--server" "::"
Mapping 9090 outside to 8080 inside the container is probably the easiest fix.
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 14th, 2021, 3:51 pm
by stefwill
Thanks for all the help.
Mapping the other port fixed the issue now it's all running as expected.
Re: Sabnzbd in Portainer starts fine then nothing
Posted: December 14th, 2021, 4:09 pm
by sander
stefwill wrote: ↑December 14th, 2021, 3:51 pm
Thanks for all the help.
Mapping the other port fixed the issue now it's all running as expected.
Good to hear. And glad you report it back.