Hi,
I'm having a special Issue about sabnzbd with ipv6 on a NAS. Here is my configuration :
I run sabnzbd on a QNAP Nas 219P. This works perfectly well, but I m trying a new setup with IPv6
My ISP (Free.fr) provides a natural ipv6 acces to internet (not 6to4 tunnels). This works I can easily ping6 a free usenet server :
PING newszilla.ipv6.xs4all.nl(newszilla.ipv6.xs4all.nl) 56 data bytes
64 bytes from newszilla.ipv6.xs4all.nl: icmp_seq=1 ttl=57 time=51.9 ms
I want now to add this server to my sabnzbd servers, and it cannot resolve this adress (it's normal it's ipv6).
I saw on forums that I must change the 'listen on' parameter in the general config. I tried '::' or '[::]' doesnt work ...
Can anyone help me ?
Thanks in advance
Sabnzbd 0.5 On NAS ipv6 issue
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
Re: Sabnzbd 0.5 On NAS ipv6 issue
SABnzbd internal web server and communication with Usenet servers are two independent things.
Provided the NAS supports ipv6 and the Python on the NAS supports it properly too,
there should not be a problem.
Does the NAS support ipv6 at all?
What you call the "listen" parameter is for the internal webserver, which need not use ipv6.
Provided the NAS supports ipv6 and the Python on the NAS supports it properly too,
there should not be a problem.
Does the NAS support ipv6 at all?
What you call the "listen" parameter is for the internal webserver, which need not use ipv6.
Re: Sabnzbd 0.5 On NAS ipv6 issue
A NAS doing IPv6? I would be surprised and happy to see that. The fact that your ISP free.fr supports IPv6 (which is good), does not prove that each network device (like NAS) understands IPv6.
So: the ping you show; is it from the NAS, or from a PC?
So: the ping you show; is it from the NAS, or from a PC?
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Sabnzbd 0.5 On NAS ipv6 issue
Hmm, http://forum.qnap.com/viewtopic.php?f=11&t=32367 seems to suggest the QNAP can indeed do IPv6.
@cereal: can you show screendumps of:
1) the QNAP webgui showing it's IPv6 address
2) the SABnzbd page showing the server settings, for example for newszilla.ipv6.xs4all.nl
@cereal: can you show screendumps of:
1) the QNAP webgui showing it's IPv6 address
2) the SABnzbd page showing the server settings, for example for newszilla.ipv6.xs4all.nl
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Sabnzbd 0.5 On NAS ipv6 issue
Hello,
Thanks for your answers.
Here are 3 screenshots attached .
1st is the ipv6 OK on the NAS webgui.
2nd is how I add the ipv6 server , and 3rd is the error I get
Thanks for your answers.
Here are 3 screenshots attached .
1st is the ipv6 OK on the NAS webgui.
2nd is how I add the ipv6 server , and 3rd is the error I get
Re: Sabnzbd 0.5 On NAS ipv6 issue
Two mistakes in your setup:
1) It's "newszilla6.xs4all" (not "newszilla.ipv6.xs4all.nl)
2) Do not use a username nor password
HTH
1) It's "newszilla6.xs4all" (not "newszilla.ipv6.xs4all.nl)
2) Do not use a username nor password
HTH
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
Re: Sabnzbd 0.5 On NAS ipv6 issue
same error with your config hints
Re: Sabnzbd 0.5 On NAS ipv6 issue
Pics please
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate