HI - sorry, noob questions.
I have a download ongoing which has stopped due to ISP time based traffic management. Should it restart autmatically, or do I need to trigger it.
How often will it try to connect to servers? And is there anyway I can check that it is retrying from the web interface.
Thanks.
Restart connections after throttling
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
-
tonycollinet
- Newbie

- Posts: 9
- Joined: January 31st, 2010, 10:32 am
Re: Restart connections after throttling
SABnzbd is very persistent in retries.
Check the Connections page to see what's going on.
The timeout you set for the server will determine how often it tries.
Does your ISP block you completely?
Not just a lower speed?
Check the Connections page to see what's going on.
The timeout you set for the server will determine how often it tries.
Does your ISP block you completely?
Not just a lower speed?
-
tonycollinet
- Newbie

- Posts: 9
- Joined: January 31st, 2010, 10:32 am
Re: Restart connections after throttling
It is supposed to be just a lower speed - but normally it is a throttling close to zero speed. However, Agent normally stays connected, but just a very low speed. SABNZBD seems now to be disconnected (both servers are showing zero connections) and I cannot see any activity at all.
Re: Restart connections after throttling
Which SABnzbd release do you use?
0.4.12 may have some issues with this situation.
Once the connection is up, pause/resume should be enough.
0.4.12 may have some issues with this situation.
Once the connection is up, pause/resume should be enough.
-
tonycollinet
- Newbie

- Posts: 9
- Joined: January 31st, 2010, 10:32 am
Re: Restart connections after throttling
I am on 0.4.12, running on synology nas, using Merty's package.
Pause resume did not get it going, but shutting down the service, and restarting did.
Edit: just as I looked, all the connections timed out - I suspect they will not restart again.
EDIT: I was wrong - they did restart.
Pause resume did not get it going, but shutting down the service, and restarting did.
Edit: just as I looked, all the connections timed out - I suspect they will not restart again.
EDIT: I was wrong - they did restart.
Last edited by tonycollinet on January 31st, 2010, 1:18 pm, edited 1 time in total.
