Hey everyone. I recently moved by SAB installation from SAB 4.0.2 running in a docker container on my synology to running 4.0.3 on my M1 Mac mini. I have a 1GB fiber connection and was pulling 25 MB/s when running on the synology and now I'm only puling around 15 on the Mac. The Mac is reporting that Download speed is limited by Disk speed 12x despite having an SSD which I'd imagine is much faster that the spinning platters in the NAS.
What could be causing this?
Thanks in advance!
SAB slower on M1 with SSD than Syno (limited by disk speed)
Forum rules
Help us help you:
Help us help you:
- Are you using the latest stable version of SABnzbd? Downloads page.
- Tell us what system you run SABnzbd on.
- Adhere to the forum rules.
- Do you experience problems during downloading?
Check your connection in Status and Interface settings window.
Use Test Server in Config > Servers.
We will probably ask you to do a test using only basic settings. - Do you experience problems during repair or unpacking?
Enable +Debug logging in the Status and Interface settings window and share the relevant parts of the log here using [ code ] sections.
-
seven3five
- Newbie
- Posts: 2
- Joined: August 15th, 2023, 11:18 am
Re: SAB slower on M1 with SSD than Syno (limited by disk speed)
What if you go to fast.com on your mini?
Those devices should easily be capable of 100MB/s.
Those devices should easily be capable of 100MB/s.
If you like our support, check our special newsserver deal or donate at: https://sabnzbd.org/donate
-
seven3five
- Newbie
- Posts: 2
- Joined: August 15th, 2023, 11:18 am
Re: SAB slower on M1 with SSD than Syno (limited by disk speed)
Fast reports 1150MB from the Mac mini. It seems the SSD is somehow the limitation.
Re: SAB slower on M1 with SSD than Syno (limited by disk speed)
I think you mean Mbps (not MB)?
That would be weird. So:It seems the SSD is somehow the limitation.
While SABnzbd is NOT doing/downloading anything: In SABnzbd's upper right corner, click on the wrench symbol ("Status and interface options"), then click on first tab Status, and there click on the Refresh Arrow. Post the values of the lower part here.